A complete fall arrest system requires three primary components: approved full body harness, connector and anchorage connector
Anchors can be connected to a variety of materials such as steel, wood and concrete
PeakWorks offers a wide range of anchor systems including: single-use/reusable roof anchors, sliding beam anchors, concrete hole anchors and permanent anchors
The anchor should be located directly above the worker to prevent swinging
The height of an anchor is a key variable when determining fall clearance
As with all fall protection products, anchors must be inspected by a competent person at a minimum annually
All PeakWorks anchors are built with a minimum tensile strength of 5,000 lb (22 kN)
All PeakWorks anchors meet or exceed CSA Z259.15 and ANSI Z359.18 standards and OSHA requirements
310-lb (141-kg) capacity for 1 worker (combined weight of person, tools, clothing, etc.)
